Hacking the Xaar 128 printhead

Powder and inkjet printing
Ivan1983
Posts: 40
Joined: Sun Oct 02, 2016 11:25 pm

Re: Hacking the Xaar 128 printhead

Postby Ivan1983 » Thu Jan 12, 2017 2:32 am

If you have questions please ask, I will share all I can. At the moment I am conducting experiments head of their own making, if the results are successful, I will share this experience
Last edited by Ivan1983 on Thu Jan 12, 2017 2:58 am, edited 1 time in total.

Ivan1983
Posts: 40
Joined: Sun Oct 02, 2016 11:25 pm

Re: Hacking the Xaar 128 printhead

Postby Ivan1983 » Thu Jan 12, 2017 2:35 am

Here is a photo with Xaar128 head installed on my machine.
Attachments
Xaar128.jpg
Xaar128.jpg (207.33 KiB) Viewed 379 times

cassio
Posts: 6
Joined: Wed Jan 04, 2017 7:06 pm

Re: Hacking the Xaar 128 printhead

Postby cassio » Thu Jan 12, 2017 1:51 pm

What language you speak

evomotors
Posts: 58
Joined: Fri Sep 02, 2016 5:33 pm

Re: Hacking the Xaar 128 printhead

Postby evomotors » Thu Jan 12, 2017 2:05 pm

Ivan1983 wrote:Here is a photo with Xaar128 head installed on my machine.

I can see that is installed, but can you show it in action?

cassio
Posts: 6
Joined: Wed Jan 04, 2017 7:06 pm

Re: Hacking the Xaar 128 printhead

Postby cassio » Thu Jan 12, 2017 2:23 pm

Ivan
What country do you live

Ivan1983
Posts: 40
Joined: Sun Oct 02, 2016 11:25 pm

Re: Hacking the Xaar 128 printhead

Postby Ivan1983 » Thu Jan 12, 2017 3:48 pm

I live in Russia.

cassio
Posts: 6
Joined: Wed Jan 04, 2017 7:06 pm

Re: Hacking the Xaar 128 printhead

Postby cassio » Fri Jan 13, 2017 11:57 am

Ivan to serve the relays
Do you have any schematic file of the relays
(Contacts 2,3,4 are used for relay control. The relay contacts are connected to VDD, VPPH, and VPPL on the board.)

Ivan1983
Posts: 40
Joined: Sun Oct 02, 2016 11:25 pm

Re: Hacking the Xaar 128 printhead

Postby Ivan1983 » Fri Jan 13, 2017 2:33 pm

I'll do the wiring. In this case, I had that pins 2,3,4 are used for relay control. And the terminals of the relay, run a load of 35 volts.

Ivan1983
Posts: 40
Joined: Sun Oct 02, 2016 11:25 pm

Re: Hacking the Xaar 128 printhead

Postby Ivan1983 » Sat Jan 14, 2017 12:38 am

Cassio, I explain in a photo
Attachments
Rele.jpg
Rele.jpg (187.61 KiB) Viewed 306 times

Ivan1983
Posts: 40
Joined: Sun Oct 02, 2016 11:25 pm

Re: Hacking the Xaar 128 printhead

Postby Ivan1983 » Sat Jan 14, 2017 1:32 am

Power supply
Attachments
Power.jpg
Power.jpg (76.66 KiB) Viewed 305 times


Return to “3DP printing”

Who is online

Users browsing this forum: No registered users and 1 guest