Page 11 of 37
Re: Hacking the Xaar 128 printhead
Posted: Thu Feb 09, 2017 5:31 pm
by xyz51
analog part
Re: Hacking the Xaar 128 printhead
Posted: Thu Feb 09, 2017 5:48 pm
by Ivan1983
What in there makes you doubt?
Re: Hacking the Xaar 128 printhead
Posted: Thu Feb 09, 2017 6:51 pm
by xyz51
In the logical part of the Arduino there are welded wires as I pointed out
You do not need to weld any wire.
This was for your use
Re: Hacking the Xaar 128 printhead
Posted: Fri Feb 10, 2017 9:37 am
by Ivan1983
And all understand, I'm confused. These are the wires that go from the analog channels to the head have no relationship, those contacts I have used to control relays, only controlled actuator and the work head have no relationship
Re: Hacking the Xaar 128 printhead
Posted: Fri Feb 10, 2017 1:24 pm
by xyz51
The one from the relay I understand.
I do not understand the analog wires where they go
can you help me
Re: Hacking the Xaar 128 printhead
Posted: Fri Feb 10, 2017 1:26 pm
by xyz51
Where the analog wires are welded and what
Re: Hacking the Xaar 128 printhead
Posted: Fri Feb 10, 2017 3:51 pm
by Ivan1983
Hello! I told you not to pay attention to the analog outputs, these pins I use them for other tasks not related to work heads.
Re: Hacking the Xaar 128 printhead
Posted: Fri Feb 10, 2017 4:47 pm
by xyz51
Thanks Ivan
Re: Hacking the Xaar 128 printhead
Posted: Fri Feb 17, 2017 11:12 pm
by moriarty
Re: Hacking the Xaar 128 printhead
Posted: Tue Feb 28, 2017 2:27 pm
by Lori
I was looking for information of the pinout of the xaar printhead.
http://d1.amobbs.com/bbs_upload782111/f ... HXZTX0.pdf
The pinout in the PDF file its only to xaar blue insulator. Someone have the pinout to the xaar purple insulator?
About the sites ries-printing and print-head.Have a lot of stories of people who bought print heads and never received them.
I work with big format printers that uses this printhead.
EDIT: i make confusing with Xaar 128 720T. This is a especial version.