Search found 6 matches
- Wed Oct 02, 2019 5:54 pm
- Forum: 3DP printing
- Topic: Hacking the Xaar 128 printhead
- Replies: 365
- Views: 1330379
Re: Hacking the Xaar 128 printhead
I used a single supply with a single output, but decoupled them. One supply should be as stable as possible at 36V, but does not need much power at all. The other one needs more amps, but is allowed to fluctuate more. And how much current would be the supplies? Should be sufficient one 1A and other...
- Fri Sep 27, 2019 3:55 pm
- Forum: 3DP printing
- Topic: Hacking the Xaar 128 printhead
- Replies: 365
- Views: 1330379
Re: Hacking the Xaar 128 printhead
Hello everyone, just a simples quention about the Xaar 128: I need two separate 36v power supply, or if i had one power supply with two outputs with 36v, can i use just one?
- Fri Aug 23, 2019 6:40 pm
- Forum: 3DP printing
- Topic: Firmware for 3DP printing with 2 powder station.
- Replies: 7
- Views: 27968
Re: Firmware for 3DP printing with 2 powder station.
so ... how would you recycle the powders for next printing? ... unless one of them is much heavier or magnetic ... Actually we´re studyng a idea that involve some kind of cleanning system (like a brush) that clean the most of excess power in the surface every layer and sepates in a specific compart...
- Wed Aug 21, 2019 5:07 pm
- Forum: 3DP printing
- Topic: Firmware for 3DP printing with 2 powder station.
- Replies: 7
- Views: 27968
- Tue Aug 20, 2019 4:56 pm
- Forum: 3DP printing
- Topic: Firmware for 3DP printing with 2 powder station.
- Replies: 7
- Views: 27968
Re: Firmware for 3DP printing with 2 powder station.
We need two powder station because a part of the team is studying the possibility of using two different powder to make a object, spreading out one layer of each powder at time, opening possibilities to make objects with differents compositions.
- Thu Aug 15, 2019 11:29 am
- Forum: 3DP printing
- Topic: Firmware for 3DP printing with 2 powder station.
- Replies: 7
- Views: 27968
Firmware for 3DP printing with 2 powder station.
Hey guys, i´m new here, but i´ve been reading some topics in this forum and anothers about 3dp printing. Recently I joined a project to develop a powder and binder jetting printer, based on PlanB, but with some modifications, and one of them is use two powder stations instead of one. My role in this...