Ytec3D Forum

the pcb files are on the github page of the controller: https://github.com/yvodehaas/HP45-stand ... ller-V4.02
you can generate gerbers with kicad

i havent done it, youd have to do it yourself. about the hardware i have no idea, maybe dragonator can elaborate more.

youd need to rewrite the firmware to make it work with 4.0/4.1

got the connector and the pcbs today, i assembled the 2 (altho i just used the single big screw with the nut that the connector originally used, as the 2 screws youre actually supposed to attach the 2 together with didnt fit for some reason and the big screw + the alignment pins work fine), im print...

amazing, thanks!

great, i ordered a connector from your tindie store but i think their payment gate fucked up, since i didnt get a security code or a confirmation about the payment. hope it goes well!!

thanks, it sure is helpful i read the page on the old hp45 controller, which says there needs to be 2 boards to breakout the printhead, i assume this is no longer correct with the v3? and i can just send this off to jlcpcb with the default settings (2 layers) and it should work? it seems a stm32 cou...

so in the end i decided to pull the trigger and order the hp45, as the xaar128 didnt seem nicer to control or better spec wise than it anyways, and they also ghosted me about the irix now im wondering, what should be the first thing i should do with it? im not sure if redesigning the boards for anot...

ah, thats a pity, how much do the results differ between the v3 and v4? also, are there any other printheads which are controllable and can compete with the hp45? the xaar128 looks good but a bit expensive and looks like it has worse specs than the hp45

hey, is there a version of the driver boards which do not need a teensy 3.5? those seem to be sold out pretty much everywhere and not produecd anymore. i have a board with an atmega2560 with a similiar size to that of a teensy laying around which id maybe like to use, but im not sure if there is som...