Ytec3D Forum

aengel and wonko, thank you both for the references.

however I assume that neither of you has succesfully printed with an UV ink with the XAAR-128 ? and not with a water based ink ?

thanks
Massimo

Hi, I'm not intending to formulate my inks, but I'd like to avoid buying water based inks (whomever formulated them) if they will ruin a 200€ printhead. On the other hand, if neither water based inks nor UV inks can work with this head, then this head is not suited for me (hope it is) regards Massimo

I don't think there's much difference between the old zcorp stuff and the new one. Brand is the same and it behaves similarly to what you describe, though probably does not compress to 1/2 it's original size. At most they have just changed slightly whatever additive they add to the plaster and label...

hi,

here's a photo of the "official" powder grains taken with an electronic microscope. See the surfaces are fairly smooth (within reason) which gives a very appropriate rehology.

kind regards, Massimo

hello aengel, thank you for sharing your design for the XAAR driver board. I'm fairly new to this topic and would like to ask you what is the reason for the dedicated "XAAR Power source" block which in other working schematics in not present. Have you experimented with different inks ? if ...

hello, this is my first post on this fantastic forum, and I take the chance to explain why I'm here. I'm operating a 3DS Projet 660 since a few years, so I have quite a bit hands on experience with this technology. Problem is that this printer (the one I own) sucks so much that I'm seriously conside...