Hacking the Xaar 128 printhead

Powder and inkjet printing
xyz51
Posts: 9
Joined: Tue Jan 31, 2017 1:07 am

Re: Hacking the Xaar 128 printhead

Post by xyz51 »

analog part
Attachments
Figura1.JPG
Figura1.JPG (63.93 KiB) Viewed 19122 times
Ivan1983
Posts: 41
Joined: Sun Oct 02, 2016 11:25 pm

Re: Hacking the Xaar 128 printhead

Post by Ivan1983 »

What in there makes you doubt?
xyz51
Posts: 9
Joined: Tue Jan 31, 2017 1:07 am

Re: Hacking the Xaar 128 printhead

Post by xyz51 »

In the logical part of the Arduino there are welded wires as I pointed out
You do not need to weld any wire.
This was for your use
Ivan1983
Posts: 41
Joined: Sun Oct 02, 2016 11:25 pm

Re: Hacking the Xaar 128 printhead

Post by Ivan1983 »

And all understand, I'm confused. These are the wires that go from the analog channels to the head have no relationship, those contacts I have used to control relays, only controlled actuator and the work head have no relationship
xyz51
Posts: 9
Joined: Tue Jan 31, 2017 1:07 am

Re: Hacking the Xaar 128 printhead

Post by xyz51 »

The one from the relay I understand.
I do not understand the analog wires where they go
can you help me
xyz51
Posts: 9
Joined: Tue Jan 31, 2017 1:07 am

Re: Hacking the Xaar 128 printhead

Post by xyz51 »

Where the analog wires are welded and what
Ivan1983
Posts: 41
Joined: Sun Oct 02, 2016 11:25 pm

Re: Hacking the Xaar 128 printhead

Post by Ivan1983 »

Hello! I told you not to pay attention to the analog outputs, these pins I use them for other tasks not related to work heads.
xyz51
Posts: 9
Joined: Tue Jan 31, 2017 1:07 am

Re: Hacking the Xaar 128 printhead

Post by xyz51 »

Thanks Ivan
moriarty
Posts: 4
Joined: Fri Feb 17, 2017 10:58 pm

Re: Hacking the Xaar 128 printhead

Post by moriarty »

cheap XAAR print heads in Indonesia/Singapore

http://www.ries-printing.com/Print-Head/Xaar-Print-Head
http://printer-head.com/brands/XAAR.html

anyone tried the 128 Electron ?
Lori
Posts: 2
Joined: Tue Feb 28, 2017 2:12 pm

Re: Hacking the Xaar 128 printhead

Post by Lori »

I was looking for information of the pinout of the xaar printhead.

http://d1.amobbs.com/bbs_upload782111/f ... HXZTX0.pdf

The pinout in the PDF file its only to xaar blue insulator. Someone have the pinout to the xaar purple insulator?

About the sites ries-printing and print-head.Have a lot of stories of people who bought print heads and never received them.

I work with big format printers that uses this printhead.


EDIT: i make confusing with Xaar 128 720T. This is a especial version.
Last edited by Lori on Thu Mar 02, 2017 6:52 pm, edited 1 time in total.
Post Reply