Page 11 of 17
Re: Hacking cartridge HP 84/85
Posted: Mon Jan 14, 2019 5:04 pm
by dragonator
I was already waiting on his post. I got an email from him before the conference showing his results. Once I am done with other printheads I cannot wait to try this one.
Re: Hacking cartridge HP 84/85
Posted: Mon Feb 11, 2019 8:44 am
by MAsic12345
who can tell where to look how to program tensi except arduino IDE
Re: Hacking cartridge HP 84/85
Posted: Mon Feb 11, 2019 9:02 am
by MAsic12345
Does anyone have the opportunity to look at this head under a microscope?
Re: Hacking cartridge HP 84/85
Posted: Mon Feb 18, 2019 8:41 pm
by MAsic12345
Re: Hacking cartridge HP 84/85
Posted: Mon Feb 18, 2019 8:45 pm
by MAsic12345
Re: Hacking cartridge HP 84/85
Posted: Tue Feb 19, 2019 6:35 am
by dragonator
That is not what I expected to be on the inside.
When you add ink or water to it, does it fill the plastic bellows or go past it. I expect that the ink needs to be on within the black plastic body with the printhead on it and not within the clear bellows to work, but I have a bit of difficulty understanding it right now.
Re: Hacking cartridge HP 84/85
Posted: Tue Feb 19, 2019 7:07 am
by MAsic12345
air only in bags
and air can be supplied through this opening
I did this on video
Re: Hacking cartridge HP 84/85
Posted: Tue Feb 19, 2019 9:47 am
by MAsic12345
ink in the reservoir as it should be
Re: Hacking cartridge HP 84/85
Posted: Tue Feb 19, 2019 3:50 pm
by MAsic12345
I understood what this air bubble is for.
the bubble is a valve and it regulates the pressure in the print head
Constant pressure is applied to the print head.if there is not enough ink in the head tank a vacuum is formed
then into the bubble through the upper valve air is drawn and it swells up and opens the constant ink pressure valve