Page 3 of 3
Re: PowderMaker1 3DP printer
Posted: Fri Aug 23, 2019 6:04 pm
by david
My make of the test ink:
+ 200ml water
+ 10ml surface cleaner
+ a few drops of ink from my son's fountain pen
+ a little IPA to get rid of the foam
and finally filter the mixture.
- 20190823_185153.jpg (136.46 KiB) Viewed 19674 times
Re: PowderMaker1 3DP printer
Posted: Sun Aug 25, 2019 8:44 pm
by david
first printhead real test at
https://youtu.be/9Dy6aHJh8QI
It's base on 50% alternating nozzle on and off. The printhead under test is a 5 colour version instead of a 6 colour printhead in the final version.
Re: PowderMaker1 3DP printer
Posted: Wed Oct 02, 2019 3:42 am
by david
second round prototype, which features an all metal key frame and precision square rail (there is a design of the dust cover for the rail and belt, just not installed yet).
This time I made it as a powder printing core. as you can see it is only the top part. Users can either put it on top of an IKEA box or design a nicer enclosure and other supporting parts to make their own printer (or product).
The build volume is max 216mm*174mm*200mm(Z).
- 20191002_042837.jpg (202.93 KiB) Viewed 19479 times