giving away my ZCorp Z400 for free

Powder and inkjet printing
Post Reply
Wonko
Posts: 85
Joined: Sat Aug 15, 2015 8:13 pm

giving away my ZCorp Z400 for free

Post by Wonko » Mon Feb 18, 2019 7:04 pm

@dragonator has first dibs.

I am giving away my ZCorp machine for free to whoever is willing to pick it up near Düsseldorf, Germany.

Please contact me at z44@matthiasm.com

I bought it many years ago with a fried ribbon cable to the printhead. In all that time, I found replacement ribbon cables, replacement ink cartridges, and many other useful informations on that machine. Since I never had any of the original powder or binder, I tested it with plaster and sake and actually built a few models. After that, it had been sitting for about 7 years, collecting dust. I wanted to fit a Xaar head on this and replace all the electronics with a simple Arduino Due, but never found the time.

Now it is time to let go. Dragonator, if you like to pick up the machine, please let me know this week. If you don't want it, anyone else can pick it up starting Monday, the 25th of February. Note that the machine is very sturdy and weighs well over 100kg and you will have to move it over a few steps. It should be complete in parts, but needs to be cleaned at least to get it working.

- Matthias

PS: if nobody wants it, it will go on ebay for a few Euros.

z44@matthiasm.com

Wonko
Posts: 85
Joined: Sat Aug 15, 2015 8:13 pm

Re: giving away my ZCorp Z400 for free

Post by Wonko » Mon Feb 18, 2019 7:07 pm

Some pics:
Attachments
20190217_174747.jpeg
20190217_174747.jpeg (82.65 KiB) Viewed 539 times
20190217_174656.jpeg
20190217_174656.jpeg (46.52 KiB) Viewed 539 times
20190217_174641.jpeg
20190217_174641.jpeg (60.47 KiB) Viewed 539 times
20190217_174630.jpeg
20190217_174630.jpeg (54.9 KiB) Viewed 539 times

User avatar
dragonator
Site Admin
Posts: 408
Joined: Fri Aug 14, 2015 4:48 pm
Location: The Nethelands
Contact:

Re: giving away my ZCorp Z400 for free

Post by dragonator » Tue Feb 19, 2019 5:45 pm

Dibs

Post Reply