ZCorp Z310+ - Pogo card
ZCorp Z310+ - Pogo card
Since I had my Z310+ all apart (bi-monthly cleaning), I decided to take some pictures of the pogo card.
- Attachments
-
- Pogo, showing HP10 connection
- IMG_0638.JPG (77.28 KiB) Viewed 9143 times
-
- Pogo, showing 2200uf capacitor
- IMG_0637.JPG (79.9 KiB) Viewed 9143 times
- dragonator
- Site Admin
- Posts: 597
- Joined: Fri Aug 14, 2015 4:48 pm
- Location: The Nethelands
- Contact:
Re: ZCorp Z310+ - Pogo card
With that many contacts, I recon it is a serial comunication going to the head, just like the CN642A. Wasn't the printhead in a Zcorp no longer in production at HP and is it only being made for Z-corp, or do you have a machine with newer heads.
Re: ZCorp Z310+ - Pogo card
Yes, the HP10 is, sadly, out of production.
ALL HAIL LORD E-BAY!
Anyhow, the interface to the fast-axis controller (mounted on the slow axis arm) is indeed a serial interface, as the 'SPI' debug pinouts in the below image would indicate.
The 'pogo' card is simplicity itself - direct wiring to the pogo pins from the ribbon connector, and some capacitors.
ALL HAIL LORD E-BAY!
Anyhow, the interface to the fast-axis controller (mounted on the slow axis arm) is indeed a serial interface, as the 'SPI' debug pinouts in the below image would indicate.
The 'pogo' card is simplicity itself - direct wiring to the pogo pins from the ribbon connector, and some capacitors.
- Attachments
-
- IMG_0699.JPG (138.57 KiB) Viewed 9137 times