Z-Corp 310+ Operating system needed

Powder and inkjet printing
Post Reply
User avatar
Skynetbeta
Posts: 4
Joined: Thu Dec 29, 2016 8:03 pm

Z-Corp 310+ Operating system needed

Post by Skynetbeta »

I have a Z-Corp 310+ with a bad IDE flash drive.
Does anyone have an image of the operating system for one of these machines?
Wonko
Posts: 110
Joined: Sat Aug 15, 2015 8:13 pm

Re: Z-Corp 310+ Operating system needed

Post by Wonko »

I have a Z400. I doubt that a HD dump would help. Sorry.
User avatar
Skynetbeta
Posts: 4
Joined: Thu Dec 29, 2016 8:03 pm

Re: Z-Corp 310+ Operating system needed

Post by Skynetbeta »

That actually might work since they use the same motherboard and os.
Wonko
Posts: 110
Joined: Sat Aug 15, 2015 8:13 pm

Re: Z-Corp 310+ Operating system needed

Post by Wonko »

They use the same motherboard? Seriously? My Z400 uses a PC-AT motherboard and a 80MB harddrive. It looks similar to this one:

http://www.engr.uky.edu/~fml/lab/z400.png

But if it really helps, I will try to find a PC with a suitable controller. It may be pre-IDE... .
User avatar
Skynetbeta
Posts: 4
Joined: Thu Dec 29, 2016 8:03 pm

Re: Z-Corp 310+ Operating system needed

Post by Skynetbeta »

According to the E-Box replacement procedure they are interchangeable.
So a Z400 OS image should work.
frankie
Posts: 10
Joined: Wed Nov 16, 2016 11:34 pm

Re: Z-Corp 310+ Operating system needed

Post by frankie »

I have a z310 drive need to figure out how to get it off
ezrec
Posts: 112
Joined: Sat Aug 15, 2015 1:31 pm

Re: Z-Corp 310+ Operating system needed

Post by ezrec »

If anyone needs an image still, send me a private message.
Post Reply