Pip-Boy 3000 Mk IV

Show off your cool build in the "I made a:" section
User avatar
dragonator
Site Admin
Posts: 595
Joined: Fri Aug 14, 2015 4:48 pm
Location: The Nethelands
Contact:

Pip-Boy 3000 Mk IV

Post by dragonator »

Got the Fallout 4 version of the Pip-Boy printed. Got it with an actual geiger counter, or have it playing games (or just show a neatly painted version). Share it here.
jmerrill1234
Posts: 3
Joined: Fri Oct 09, 2015 5:18 pm

Re: Pip-Boy 3000 Mk IV

Post by jmerrill1234 »

Image
40ish hours of printing at .2mm layer height/30% infill on Prusua I3, ABS

managed to light the rad dial, but not the radio dial. weathered it too, I like it!

Image
jmerrill1234
Posts: 3
Joined: Fri Oct 09, 2015 5:18 pm

Re: Pip-Boy 3000 Mk IV

Post by jmerrill1234 »

Image

one more...
User avatar
dragonator
Site Admin
Posts: 595
Joined: Fri Aug 14, 2015 4:48 pm
Location: The Nethelands
Contact:

Re: Pip-Boy 3000 Mk IV

Post by dragonator »

Looks neat.

I did leave space to add leds to the Geiger and Radio dial, but sadly did not have the time to make them light up myself.

I hope support was not too much of a problem?
jmerrill1234
Posts: 3
Joined: Fri Oct 09, 2015 5:18 pm

Re: Pip-Boy 3000 Mk IV

Post by jmerrill1234 »

not at all, those that were necessary were pretty easy to remove, and the pieces cleaned up nicely. I did use a bit of contour putty on the front areas, which worked well in smoothing them out without a ton of sanding. Most difficult thing? getting the tape mechanism to work smoothly--I used a couple of tension springs that I had in a cheap spring kit and sanded a fair bit.

Its a beautiful kit and a huge undertaking, dragonator! thank you so much for your contribution to the community!
johnster000
Posts: 4
Joined: Tue Oct 13, 2015 4:07 pm

Re: Pip-Boy 3000 Mk IV

Post by johnster000 »

This is my work in progress so far, ill post up some more when i get it all smoothed and painted!
Attachments
IMG_0452.JPG
IMG_0452.JPG (483.64 KiB) Viewed 36900 times
IMG_0462.JPG
IMG_0462.JPG (504.38 KiB) Viewed 36900 times
IMG_0453.JPG
IMG_0453.JPG (449 KiB) Viewed 36900 times
johnster000
Posts: 4
Joined: Tue Oct 13, 2015 4:07 pm

Re: Pip-Boy 3000 Mk IV

Post by johnster000 »

Check it out! its finally done https://youtu.be/kFcIStl3cTE thanks so much for the design! its kick ass!
User avatar
dragonator
Site Admin
Posts: 595
Joined: Fri Aug 14, 2015 4:48 pm
Location: The Nethelands
Contact:

Re: Pip-Boy 3000 Mk IV

Post by dragonator »

I am impressed. It looks amazing. I like where you hid the light switch. Behind the tape deck seems to be a better place than where I stuffed it myself. What did you use as a border for your phone. It looks like it is part of the Pip-by itself. I assume that you used a Pip-Boy app?
johnster000
Posts: 4
Joined: Tue Oct 13, 2015 4:07 pm

Re: Pip-Boy 3000 Mk IV

Post by johnster000 »

Thanks! I couldn't have done it without you! But I used the step files you provided and made a bezel that fit perfectly on the inside of the screen area and that matched where the android app would line up, 3d printed it and glued it in place. I also have a vinyl plotter at work, so I had the pipboy logo printed out as well and placed that over the bezel. As for the app, I found this guy who had put together a pipboy app that requires you to extract your own data files from the game installed on a computer. It worked amazing! I'll post some more pictures of the insides and a link to the app when I have some more time today. Thanks again!
johnster000
Posts: 4
Joined: Tue Oct 13, 2015 4:07 pm

Re: Pip-Boy 3000 Mk IV

Post by johnster000 »

here are some pictures of the bezel and the phone I used on the inside. hot glued the phone and bezel together, and hot glued the battery and switch in place. Hot glue is my best friend when im in a rush! i wanted to have this ready for halloween, so i didnt have time to make it all look pretty on the inside:P
Attachments
IMG_0589.JPG
IMG_0589.JPG (199.85 KiB) Viewed 36657 times
IMG_0588.JPG
IMG_0588.JPG (187.37 KiB) Viewed 36657 times
IMG_0586.JPG
IMG_0586.JPG (191.83 KiB) Viewed 36657 times
Post Reply