Hacking cartridge HP 84/85
- dragonator
- Site Admin
- Posts: 597
- Joined: Fri Aug 14, 2015 4:48 pm
- Location: The Nethelands
- Contact:
Re: Hacking cartridge HP 84/85
I was already waiting on his post. I got an email from him before the conference showing his results. Once I am done with other printheads I cannot wait to try this one.
-
- Posts: 116
- Joined: Sat Aug 25, 2018 5:26 pm
- Location: Poland
Re: Hacking cartridge HP 84/85
who can tell where to look how to program tensi except arduino IDE
-
- Posts: 116
- Joined: Sat Aug 25, 2018 5:26 pm
- Location: Poland
Re: Hacking cartridge HP 84/85
Does anyone have the opportunity to look at this head under a microscope?
-
- Posts: 116
- Joined: Sat Aug 25, 2018 5:26 pm
- Location: Poland
Re: Hacking cartridge HP 84/85
I'm starting to disassemble and explore this printhead
-
- Posts: 116
- Joined: Sat Aug 25, 2018 5:26 pm
- Location: Poland
- dragonator
- Site Admin
- Posts: 597
- Joined: Fri Aug 14, 2015 4:48 pm
- Location: The Nethelands
- Contact:
Re: Hacking cartridge HP 84/85
That is not what I expected to be on the inside.
When you add ink or water to it, does it fill the plastic bellows or go past it. I expect that the ink needs to be on within the black plastic body with the printhead on it and not within the clear bellows to work, but I have a bit of difficulty understanding it right now.
When you add ink or water to it, does it fill the plastic bellows or go past it. I expect that the ink needs to be on within the black plastic body with the printhead on it and not within the clear bellows to work, but I have a bit of difficulty understanding it right now.
-
- Posts: 116
- Joined: Sat Aug 25, 2018 5:26 pm
- Location: Poland
Re: Hacking cartridge HP 84/85
air only in bags
and air can be supplied through this opening
I did this on video
and air can be supplied through this opening
I did this on video
- Attachments
-
- IMG_20190219_075918.jpg (66.93 KiB) Viewed 19294 times
-
- Posts: 116
- Joined: Sat Aug 25, 2018 5:26 pm
- Location: Poland
Re: Hacking cartridge HP 84/85
ink in the reservoir as it should be
-
- Posts: 116
- Joined: Sat Aug 25, 2018 5:26 pm
- Location: Poland
Re: Hacking cartridge HP 84/85
I understood what this air bubble is for.
the bubble is a valve and it regulates the pressure in the print head
Constant pressure is applied to the print head.if there is not enough ink in the head tank a vacuum is formed
then into the bubble through the upper valve air is drawn and it swells up and opens the constant ink pressure valve
the bubble is a valve and it regulates the pressure in the print head
Constant pressure is applied to the print head.if there is not enough ink in the head tank a vacuum is formed
then into the bubble through the upper valve air is drawn and it swells up and opens the constant ink pressure valve
-
- Posts: 116
- Joined: Sat Aug 25, 2018 5:26 pm
- Location: Poland