I want to print one with the reloading mechanism, i am also thinking about modifying the energy cell to let it hold the batteries.dragonator wrote:This was my biggest print to date. Luckily it is just a lot of parts. None of the parts are incredibly complicated. I wish you good luck printing.
Will you be printing one with or without the mechanism.
AER9 Laser Rifle
Re: AER9 Laser Rifle
- dragonator
- Site Admin
- Posts: 597
- Joined: Fri Aug 14, 2015 4:48 pm
- Location: The Nethelands
- Contact:
Re: AER9 Laser Rifle
Adventurous, I like the idea of making the energy cell hold a battery. It should be doable. If you need help with some things, let me know and I'll see what I can do.
Re: AER9 Laser Rifle
Ok, Odd question, where did people find the proper bolts and screws for putting this together? Sadly, the hardware stores around here barely carry ANY metric stuff.
- dragonator
- Site Admin
- Posts: 597
- Joined: Fri Aug 14, 2015 4:48 pm
- Location: The Nethelands
- Contact:
Re: AER9 Laser Rifle
Most of the stuff can be bought in ordinary hardware stores here in the Netherlands. The grub screw were bought at a bit more specialized suppliers, since most hardware stores don't bother with them. I cannot speak for the USA, I do not live there. I think that this would be a good thing to source online.
Re: AER9 Laser Rifle
Mmm, I checked around online, sadly, it's all "minimum order of 200" or something like that. I'll keep looking around for a metric store. Worst case scenario, I'm only a hour away from Canada.
- dragonator
- Site Admin
- Posts: 597
- Joined: Fri Aug 14, 2015 4:48 pm
- Location: The Nethelands
- Contact:
Re: AER9 Laser Rifle
If your worst case option is an hours drive to Canada, I might have a better option. I still have a small stock and am capable of getting more. Shipping in an envelope is always less than €10. If it is necessary, I could ship the required parts to you. PM me if you have reached this point.
Re: AER9 Laser Rifle
Oh no no, My GF and I wanted to go up to Canada anywho, this'll just give us another reason.
- dragonator
- Site Admin
- Posts: 597
- Joined: Fri Aug 14, 2015 4:48 pm
- Location: The Nethelands
- Contact:
Re: AER9 Laser Rifle
Don't let me stop you from paying a surprise visit to you northerly neighbor. I hope they have the stuff you are looking for. The offer will remain though.
Re: AER9 Laser Rifle
After AGES, I finaly managed to force myself to work on my AER, and it's done! Sadly, I couldn't make it a reloading one, so I had to tweak things a bit, used some plumbers putty, painted silver to hold the necessary bits in place. I think it turned out very well though! Currently printing another Pipboy for my girlfriend, then we'll need to make her a Fat Man, as she's going as a Boomer.
![Image](http://i.imgur.com/U3UQOa0.jpg)
![Image](http://i.imgur.com/U3UQOa0.jpg)
- dragonator
- Site Admin
- Posts: 597
- Joined: Fri Aug 14, 2015 4:48 pm
- Location: The Nethelands
- Contact:
Re: AER9 Laser Rifle
That looks absolutely amazing. Sorry to hear about the reload mechanism, but it still is amazing. Good luck with the Pip-Boy and the Fat Man.