Endstops
-
Willtmakinen
- Posts: 1
- Joined: Tue Jun 27, 2017 12:23 pm
Endstops
The electronics, usage, and other pages make mention of the use of endstops for homing, however neither the main gathering materials or electronics pages have details on which ones to buy. Additionally, I have seen other forum posts reference an opto endstop, however I am unsure where it would fit into the printer. Any ideas?
-
dragonator
- Site Admin
- Posts: 607
- Joined: Fri Aug 14, 2015 4:48 pm
- Location: The Nethelands
- Contact:
Re: Endstops
The details which one to but are on the Gathering materials page, under electronics:
http://ytec3d.com/plan-b-materials/
https://reprapworld.com/products/electr ... o_endstop/
Where to mount them should be visible in the drawings on the assembly page.
http://ytec3d.com/plan-b-materials/
https://reprapworld.com/products/electr ... o_endstop/
Where to mount them should be visible in the drawings on the assembly page.