Problems with SD card

[dragonator]

I have heard this more. Something in the past few years has broken my code, and I no longer poses the hardware to test it.

The only thing that I can imagine is that something in the gcode is not being read properly, either because the gcode used is wrong, or the SD card library is. However what exactly is difficult to say without hardware. I suspect the most likely place of the failure is in the SD_read part of the code, but the code has little in the way of debugging tools.

[crisiM]

Thanks for the fast respond.
line 13: int temp_buffer[5];
line 733 exceeds buffer size : for (int n = 0; n < 6; n++); changed to n<5
Now it works.

[dragonator]

You seem to have just found the issue that has been bugging many people. Changing it to 5 will prevent an overflow from happening. I will keep this one in mind for everyone that tries the code, and will try and fix it this week in the downloads. Many thanks for pointing this out to me.

My only personal question is how this managed to work with me, but not later. Clearly something was updated that made this a breaking mistake, where it used to be just a bad mistake.

[dragonator]

It is now updated on the firmware page. Lets hope it helps people.