Megatronics v3.2 Issues

For any Plan B specific topics
Post Reply
User avatar
Posts: 1
Joined: Wed Dec 05, 2018 8:52 pm

Megatronics v3.2 Issues

Post by GMO_Taco »


I've been working on my own Plan B printer now for the last few months. I'm about 90% finished with the build, but I ran into an issue. I bought the Megatronics v3.2 board and it turns out it's not compatible with the keyboard. I found a potential solution but I'm having trouble adjusting the plan b firmware to account for the fix. Here is the link to the potential solution- Any help would be greatly appreciated.

User avatar
Site Admin
Posts: 599
Joined: Fri Aug 14, 2015 4:48 pm
Location: The Nethelands

Re: Megatronics v3.2 Issues

Post by dragonator »

Do you know what the physical difference is between the header on the V3.2 and the V3.1. I did read through the document a little, but it only mentions what the fix is, and not the problem, and I have difficulty figuring out what is causing you issues.
Post Reply