Hacking the HP 60 Inkjet Carrier

Home Forums 3DP printing Hacking the HP 60 Inkjet Carrier

Viewing 2 posts - 16 through 17 (of 17 total)
  • Author
    Posts
  • #1968
    ezrec
    Participant

    Ok, some oscilloscope shots and the big pile of CSV and VCD files I collected are on a new page on my Wiki:

    Pin 11 definitely appears to be some type of sync pulse, and Pin 10 appears to be data in the sync pulse. As best as I can tell from my Tektronix T912 (yes, it’s as old as I am!) both Pin 11 and Pin 10 are normal square wave signals, but are at the end of the range of my 10Mhz scope.

    I think the Saleae (Logic 16) may have problems with these signals, as they do not appear to go high on my scope when the Saleae reported them high, but my scope recorded nice waveforms where the Saleae only reported glitches in the data portion.

    #1969
    ezrec
    Participant

    And, evidently, I can’t just directly put in an external link.

    Trying again..

    http://www.evillabs.net/wiki/index.php/Project_HP_F4480_Pen_Controller

Viewing 2 posts - 16 through 17 (of 17 total)
  • You must be logged in to reply to this topic.